The Difference Between the Straight Seam Welded Pipe and the General Welded Pipe and the Characteristics and Usage of the Spiral Pipe
steelpipe2016-05-06T09:39:08+00:00March 26th, 2015|
The Difference Between the Straight Seam Welded Pipe and the General Welded Pipe Straight seam welded pipe Straight seam welded pipe is made of steel plate or steel strip after bending forming, and then through [...]
Specific Operation Method for the Surface Treatment of Steel Pipe
steelpipe2016-05-06T09:39:08+00:00March 25th, 2015|
All the insider knows that steel pipe surface treatment is one of the key factors determine the service life of the pipeline corrosion, it is a precondition for whether the anti-corrosion layer and steel tube [...]
Several Problems should be Pay Attention on When Using Spray (Cast) Shot Derusting on Steel Pipe Surface
steelpipe2019-05-23T02:36:11+00:00March 25th, 2015|
In the last article, the article talks much on the specific operation methods for the surface treatment of steel pipe, and in this article, which problems should be pay attention on when using spray (cast) [...]
Spiral Steel Pipe Submerged Arc Welding Process and Spiral Steel Pipe Process
steelpipe2019-05-23T02:36:11+00:00March 25th, 2015|
Spiral steel pipe submerged arc welding process Automatic submerged arc welding was invented in 1940, a new kind of welding method, it adopts slag protection as manual welding, but is not coated electrode, the slag [...]
Galvanized Pipe Coating Process and Hot Dip Galvanizing Production Difficulties and Countermeasures
steelpipe2019-05-23T02:36:11+00:00March 24th, 2015|
Galvanized pipe coating process A continuous galvanized pipe coating production technology and equipment, and the process includes the following steps: passivation, cleaning; paint; curing, with drying preheating before coating, and the drying preheating temperature is [...]
Seamless Steel Tube Production Process and the Notices When Buying Pipes
steelpipe2016-05-06T09:39:09+00:00March 21st, 2015|
Thick wall seamless steel tube production process Cutting the circular tube embryo to about 1 meter of billet by cutting machine. The thick wall steel pipe is the pipe that the ratio between outer diameter [...]
Identification of Inferior Steel Pipe
steelpipe2019-05-23T02:36:11+00:00March 20th, 2015|
1.The folding is easy to happen with inferior steel tube Folding is formed on the surface of the pipe line, this kind of defect often throughout the entire product longitudinal. The reason for causing of [...]
The Application of Steel Pipe and Steel Tube Concrete Structure
steelpipe2019-05-23T02:36:11+00:00March 18th, 2015|
The application of steel tube in the concrete structure We often see the water-cooled steel structure system. This is by using the specially designed structure to make the water with rust-roof and freeze-proofing material to [...]
Cold Rolled Seamless Steel Tube and Finish Pipe Production Process
steelpipe2016-05-06T09:39:09+00:00March 16th, 2015|
Cold rolled seamless steel tube Cold rolled precision seamless steel tube (GB3639-2000) is a kind of seamless steel tube used for precision mechanical structure, hydraulic equipment and the steel sleeve with high precision and good [...]
The Introduction of Welded Steel Tube (Section Two)
steelpipe2016-05-06T09:39:09+00:00March 6th, 2015|
In this article, I’d like to go on talking about the welded steel tube. 3. The ordinary carbon steel wire casing (GB3640-88) is the steel tube used for protecting the wire in industrial and civil [...]
