Project Description
Manual powder coating machine, Automatic powder coating line, Spray painting equipment, Pretreatment System, Drying Oven, Powder Spraying Gun, Reciprocator, Fast Automatic Color Change Equipment, Powder Coating Booth, Powder Recovery Equipment, Conveyor C
Our mainly products include: Manual powder coating machine, Automatic powder coating line, Spray painting equipment, Pretreatment System, Drying Oven, Powder Spraying Gun, Reciprocator, Fast Automatic Color Change Equipment, Powder Coating Booth, Powder Recovery Equipment, Conveyor Chains, Curing Oven, etc.All the systems are widely used on the applications of automotive, home and office appliance, machines industry, metal fabrications and so on.And through to CE, ISO 9001 standards. *Pollution free operation.*Safe to operate*Maximum recovery efficiency.*Durability.*Quick colour change. 1,Hanna powder coating equipment absorbed European technology to develop generation intelligent gun, unique circuit board design,Complete solve the problem of workpiece powder grooves on the dead angle,groove with powder. 2,Hanna powder coating equipment technology unique to the wind system which make the effective temperature difference control furnace temperature fluctuate 3 ℃,ensure that products without color difference,coating dose not fall off. 3,Our company using the internationally recognized big cyclone recovery system powder recovery rate as high as99.2%,ensure no dust spillover.Unique fast color change powder supply center, change color only 10 to 15 minutes.
Equipment Constitute | Application |
Pretreatment System | In order to better surface spraying |
Powder spraying room | The workpiece is coloured in it |
Conveyor Chain | Transport the workpiece to the specified place |
Curing heating system | The powder is fastened on the workpiece by temperature |
Heating System | Fuel can be natural gas, electricity, coal or diesel |
Powder Coating Gun | Spray the powder on the workpiece surface |
Item | Details |
Structure | ♦ Packing down, easy to transport
♦ Single operation position for painting ♦ Production line type, exit / entrance on the sides, the booth could be used with suspended rail together |
Outside size (L*D*H) | 3400*1670*2880mm |
Inside size (L*D*H) | 2400*1150*1700mm |
Exit / Entrance size (W*H) | 600*1700mm |
Cabin system | ♦ Made of galvanized steel, using varnish powder coated
on the surface, very durable |
Powder recovery system | ♦ Single-stage recovery system with pulse
blowback system ♦ Dust filter cartridge*4 pcs, each size 600mm*Φ320mm ♦ Solenoid valve*4 pcs, the hole is Φ20mm, DC24V |
Circulation system | ♦ One set of centrifugal blower, motor 5.5kW, air flow
is 4000-6800m3/h ♦ The blower connected with booth by anti-flaming soft tubes ♦ The exhaust vent of blower could be adjusted in four directions |
Blower holder system | ♦ Made by 40*40 square tubes
♦ Independent from the booth to prevent the resonance and reduce the noise |
Lighting system | ♦ One set of explosion proof lights, two Philips tubes,
each 36W |
Control system | ♦ One set of control cabinet, control the blower, pulse
blowback system and lights |
Dear customers, Above information is for our standard model PCB-34001(C)
Size and powder recovery system could be redesign according to your requirements Please just contact us |
Advantages of Powder Coating Line with Powder Booth
- Manual powder coating booth with single operation position
- Made of galvanized steel, using varnish powder coated on the surface, very durable and nice
appearance
- Easy to assemble, knock down and move
- Save labour, powder coating and working time. Could get higher productivity at a lower cost
(1) The surface of booth cabin is smooth and there is no angle to accumulate powder coating,
so that it is very easy for cleaning and changing color
(2) Powder recovery system is single-stage recovery system with pulse blowback system.
Adopt high quality filters and the pulse impacts filters automatically. The ideal combination
has highly recovery rate of powder and increase powder recovering speed
- Production line type. The booth could realize the changing production mode from manual
to semi-automatic. When install guide rail and driving system, workpieces would go through the
booth automatically. Even better staff could just stand before the booth and paint, especially for the
heavy and large workpiece
- Combining batch type curing oven to form a mini production line. That is would be more convenient
and we could get higher productivity. Please kindly check the most welcome design from our factory